home *** CD-ROM | disk | FTP | other *** search
- Path: mona.mbar.dtu.dk!c948374
- From: c948374@mona.mbar.dtu.dk (Rask Lambertsen)
- Newsgroups: bit.listserv.i-amiga,comp.sys.amiga.hardware,comp.sys.amiga.misc
- Subject: Re: Need help wtih new hard drive and GVP A500-HD+
- Followup-To: bit.listserv.i-amiga,comp.sys.amiga.hardware,comp.sys.amiga.misc
- Date: 18 Feb 1996 15:43:34 GMT
- Organization: News Server at UNI-C, Danish Computing Centre for Research and Education.
- Message-ID: <4g7hf6$fhu@news.uni-c.dk>
- References: <4g3ipa$76r@abc.ksu.ksu.edu>
- NNTP-Posting-Host: mona.mbar.dtu.dk
- X-Newsreader: TIN [version 1.2 PL1]
-
- On 16 Feb 1996 21:41:30 -0600 Mitchell W. Wing (mwing@ksu.ksu.edu) wrote:
- > I recently bought a used conner scsi 170 meg hard drive and cannot
- > get it to work properly when connected to my GVP A500-HD+ wtih a
- > quantum scsi 240 meg hard drive. It works fine when connected to a
- > friends 3000 in the same external case. It will work on my 500 if I
- > disconnect the quantum. Any help would be appreciated
-
- It sound like a problem with the SCSI bus terminators. Only one of your
- harddrives should have terminators installed. In your case, try removing
- the terminators on the Quantum drive.
-
- There must be exactly *one* terminator at each end of the SCSI bus. The
- controller usually sits in one end and has one of the terminators. The
- SCSI device in the other end must have a terminator too, but *no* other
- devices on the bus is allowed to have a terminator.
-
- --
- Regards,
-
- /»»»»»»»»»»»»»»»»»»»»»»»»»»»»»»»»»»»»»»»»»»»»»»»»»»»»»»»»»»»»»»»»»»»»»»»»\
- | Rask Ingemann Lambertsen | E-mail: c948374@student.dtu.dk |
- | Amiga GNU CC README maintainer | WWW: http://www.gbar.dtu.dk/~c948374/ |
- | Keyboard error: <Ctrl> and <Alt> are stuck - press <Del> to continue |
-